5000W Pure Sine Wave Power Inverter 36VDC to 120VAC
5000W continuous 10000W peak true pure sine wave solar power inverter, as good as grid power, power backup for home power supply
Transfer 36VDC to 110V 120VAC, 60Hz frequency, dual US outlets. Intelligent temperature control cooling fan. Earth connection for both PCB board and output. Digital LED display.
Bipolar High-frequency Inverter: With two large high-frequency inductors, this inverter has function of energy storage, boosting, filtering, and EMI elimination, which can significantly improve the performance and longevity of the inverter.
Stable Output: Imported high quality mosfets with strong driving capacity.Pure copper inductance, filter the wave form, ensure the true pure sine wave AC output. 2.00mm PCB allows the stronger current floating on the circuit, increase the load capacity. There is also an independent auxiliary power supply.
Powerful Cooling System: The heat sink with large surface area and the 96*96mm powerful large fan(the general fan is 60*60mm) are more conducive to the circulation of air and achieve the effect of rapid cooling.
DC input: 36V
DC input range: 30V-45V
No Load Current Draw: 1.5A
AC output: 120V
Socket:15a USA type Low Voltage Alarm:29.5V-31.5V
Low Voltage Shut Down: 29V-31V
Over Load: shut off, recover manually
Over Voltage Shut Down:45V
Over Thermal: Shut Off Output Automatically, Over voltage protection
Cooling Ways: Cooling Fan will run when the temperature is over 50 degree
Size: 24.5 x 12.8 x 8.1 cm
Weight: 8.98 kilograms
1. Please use the standard battery cables we sent, or a full power output may not be guaranteed. And the fuse are just spare parts.
2. Please do not connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden.
3. Please do not overload. If your applications are inductive loads, please choose the inverters whose continuous power is 3-7 times higher than the watts of your appliances. If you want to power up a refrigerator, we suggest you use 10 times higher power inverter.
4. Please turn off the load first then turn off the inverter. And as there is a soft start function, please turn on the inverter first then turn on your loads, or the output may not stable at the first seconds.
5. For a red light flashing, it is a kind reminder to note you the input voltage is a bit high, you can regardless of it. If the input is too high, the inverter will shut down automaticly.
6. The output voltage can be adjusted in a little range.
Tel: + 86-18665474518
Add: RM 32, 11/F, Lee Ka Industrial Building, 8 Ng Fong Street, San Po Kong, KL, Hong Kong