This product adopts LLC resonant half bridge topology, which has the advantages of high conversion efficiency, small interference, fast dynamic response speed, stable output voltage, as well as integrated over-current, over-voltage, overheat, output short circuit and other protection functions. It is the best combination of medium and high-end power amplifier products. It can be used for power supply of 200-800w power amplifier. The continuous power of 25 ° ring temperature is about 500W, and the dynamic power can reach 1200W.
Due to the different specifications, there may be differences between the received physical products and the pictures. Please refer to the physical products.
Product model: win-p800a
Input voltage: AC110V / 120V; ac200-240v (switchable input)
Output voltage: main ± 70V; auxiliary ± 12V; independent 12V (output voltage can be customized to other specifications)
Voltage stabilization accuracy: Main no-load + 10%, load ± 3%; auxiliary no-load ± 20%, load ± 15% (AC220V input, 400W load; main no-load voltage positive deviation of about 10%, voltage stable at nominal value after connecting 20W load)
Output current: ± 70V / 5.5A; ± 12V / 0.5A; 12V / 0.5A
Continuous power: 400w-500w (continuous operation at 25 ℃)
Maximum power: 800W (continuous operation at 25 ℃ for about 5 minutes)
Instantaneous power: 1200W (power generated during dynamic signal impact, time less than 1s)
Conversion efficiency: Max 95%
Operating environment: - 10 ~ 40 ℃
Storage temperature: - 30 ~ 85 ℃
External dimension: 80 * 148 * 45mm
Definition of foot position | ||
NO. | Connector pin | Function definition |
1 | L/NC/N | AC input, l for live line, n for zero line, NC empty leg |
2 | V+ | Output to ground +70V |
GND | Power output ground | |
V- | Output to ground -70V | |
3 | FV+ | Output voltage to G +12V |
G | FV + / - public, not connected to main power ground, suspended | |
FV | Output voltage to G -12V | |
4 | DV+/DV- | Suspension output + 12V, and the voltage difference with the ground shall not exceed ± 150V |
5 | PROTECT | The voltage difference between the protection trigger end and the floating input and the ground shall not exceed ± 150V. The 3-15v voltage is effective, and the response time is less than 100ms. After triggering, the power supply is turned off and maintained. The normal state can be restored only after the power is turned off for 5min. |
Contact: Inverter
Phone: +86-075532914836
Tel: + 86-18665474518
Skype: michaeldzc
E-mail: info@zowinda.com
Add: RM 32, 11/F, Lee Ka Industrial Building, 8 Ng Fong Street, San Po Kong, KL, Hong Kong